Supreme Silicones India Private Limited

Silicone - Wax dispersion for Lubrication of Sewing Threads. Textile Fabric Finishing Agent SS TEX 8271 is premium wax dispersed siloxane designed for smooth thread finish. Provides uniform distribution over entire thread surface, producing thread with low friction variations. Used successfully on dyed thread and fabric.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Mould Release Agent (SS EM) SS EM 320, 330, 365 General purpose stable Poly Dimethyl Siloxane fluid in water emulsion silicone mould release emulsion. SS EM 3720  Aqueous Emulsion of Silicone fluid with Anionic Emulsifying agents specialty designed for lubricating applications and as a release agent.


SS EM 365 & EM 3500 -high concentration Thermal stable emulsion designed for certain varying temperature conditions. SS PR Poly Urethane Release Agent. Used for release of plastic and polyester parts such as shoe sales & PU parts such as bumpers, dash board and other similar applications.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

AQUAREST WR 1300 is reactive Fluid emulsion especially designed for treating substrates to impart and improve water repellent properties.

Examples are Textiles and Fibers, Paper, Wood and wood articles, Gypsum Board, Plywood, and Particle Board, Powder, Fire fighting foam & Insulating materials.

Typical Values – Should not be considered as specifications.

Important Note :Mentioned Rates are of products having minimum concentration and % active solids.Rates may increase or decrease considering % Concentration and % Active content of products depending upon application or customer requirements

We are ISO 9001:2008 Certified Manufacturer of Rubber Mould Release agent and Emulsion. Used for Release application for Variety of Rubber Bonded Parts and Rubber. Act as good shining and Polishing agnet on rubber. provides very good shining effect. Available in different percentage ie 5% to 65% Emulsion. We laso have silicone oil as 100% release Oil and Shining agent. Available in different Viscosities. Used in Plastic, concrete and other industrial applications.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

SS EM Penta is Paintable silicone mould release agent based on alkyl-aryl alkyl modified silicone fluid. Designed for release of parts to be painted, coated, and plated.Release applications for concrete paver blocks. Used for decorative masonry construction.

Release agent for die casting of aluminum, zinc, etc.

Release agent for plastic parts to be painted or metalized

Paintable Silicone Mould Release, Paintable Silicone Mould Release, Paintable Silicone Mould Release.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

We are manufacture of range of silicone chemicals for.Rubber Industry.PharmaTextile.Paint.Agriculture.Sugar.Plastic.Construction.PetroFoundries.Etc 

Manufacturer of Silicone Emulsions for industrial, Pharma and cosmetic applications, Mould Release Agent (SS EM -) is Silicone fluid emulsions which are inert, heat stable, non-toxic products, covers many industrial applications where lubrication, gloss, antistatic, protective and Release properties are advantageous.Antifoam – Defoamer (SS AF -) is Antifoam Emulsion designed to provide optimum antifoam performance for general purpose and special pH conditions, combined with good dilution stability and good foam knock down performance.MethylHydrogen Emulsion (SS ER -) is reactive methyl hydrogen emulsion especially designed for treating variety of substrates fibers where water repellent or hydrophobic properties required.Textile Softners ( SS SOF -) Amino Silicone Fluids Emulsions specially designed to provide excellent elastic properties, bounce, excellent softness, silky finish to variety of fabrics with durability and unique handle.Shine – Polish Agent ( SS SP -) is specially designed Shine and Polish emulsions formulations which provides high Gloss and good adhesion to variety of surfaces .The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness.

 

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

We have Dashboard polish, tyre polish, car body polish & polish for our automobile & automotive parts. Due to high quality and durability these are famous among its user. These products are available in market at most economical rates. Our products are highly appreciated by our clients in the market.polish, Shining agent, shining agent, polish, Shining agent, shining agent, polish, Shining agent, shining agent,

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

We are manufacturer of Silicone mould release agents for Rubber, Plastic, Concrete and foundry Ind. Our Mould Release Agent consists of a stable Poly Dimethyl Siloxane fluid in water emulsion. Mould Release Agent can be recommended for the release of articles where post-finishing is required. SS EM 3720 is Aqueous Emulsion of Silicone fluid with Anionic Emulsifying agents specialty designed for lubricating applications and as a release agent. SS EM 365 & EM 3500 is high concentration Thermal stable emulsion designed for certain varying temperature conditions.We have Mould release agent from 5% to 55% active content.

 

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

 Manufacturer of Silicone Emulsions for industrial, Pharma and cosmetic applications, Mould Release Agent (SS EM -) is Silicone fluid emulsions which are inert, heat stable, non-toxic products, covers many industrial applications where lubrication, gloss, antistatic, protective and Release properties are advantageous.Antifoam – Defoamer (SS AF -) is Antifoam Emulsion designed to provide optimum antifoam performance for general purpose and special pH conditions, combined with good dilution stability and good foam knock down performance.MethylHydrogen Emulsion (SS ER -) is reactive methyl hydrogen emulsion especially designed for treating variety of substrates fibers where water repellent or hydrophobic properties required.Textile Softners ( SS SOF -) Amino Silicone Fluids Emulsions specially designed to provide excellent elastic properties, bounce, excellent softness, silky finish to variety of fabrics with durability and unique handle.Shine – Polish Agent ( SS SP -) is specially designed Shine and Polish emulsions formulations which provides high Gloss and good adhesion to variety of surfaces .The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Dimethicone Fluids is a clear, colorless, and odorless 100% Polydimethyl Siloxane/ Silicone Oil / with a viscosity Range 10 cst, 20 cst, 100 cst, 350cst and 1000 cst. It is used as a lubricant and release agent in a wide range of applications that include: Food Processing, Food Packaging,Paper and Paperboard for Food Products, Food Treatment, Etc. Used as Defoamer / Antifoam in variety of Food grade applications. Basic material of cosmetics, skin care products, hairdressing products.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Alkylated silicones are based on alkyl pendant groups. Alkylated silicones are represented by both alkyl and alkyl aryl silicones. They are excellent lubricants in textile, metalworking and automotive applications. They impart water and solvent repellency to textiles, and flow, levelling, slip and mar resistance to inks and coatings. They also provide gloss, emollience and softness in personal care applications. These products can range from liquids to soft pastes to hard waxes.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Silicone Emulsions are water diluteable emulsion of Polymedthly siloxane fluids.These silicone emulsions are chemically inert, non toxic, non-flammable and non-harzardous. They possess low surface tension and superior wetting properties.These silicone emulsions are particularly suited for mould release applications during rubber moulding and metal casting because they form films of low adhesion and therefore be applied to moulds to prevent adhesion of the moulded articles.They are also used as water solutable lubricants, paper and textile finishing agents and as a polish ingredient, various grades of silicone emulsions are being formulated with respect to their solid contents.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Shine Polish Agent (SS SP) is specially designed Shine and Polish emulsions formulations which provides high Gloss and good adhesion to variety of surfaces .The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement or suggested.