Supreme Silicones India Private Limited

We are manufacturer of Silicone oil. We do have Recycle silicone oil which is raw grade and very very cost effective, low cost and easily be used in emulsion makeing. You can formulate cost effective silicone emulsions :Mould release emulsuion, antifoam defoamer emulsion, shining agent. It can directly can be used as Lubricant, shining applications where pure oil is not needed.We also have waste or off specification silicone oil for industrial applications. Very Low cost.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

PDMS oil - 0.65 cst, 1 cst, 10 cst, 20 cst, 100 cst, 350 cst, 1000 cst, 5000 cst, 12500 cst, 60000 cst. We offer off specification Low and High Viscosity Silicone PDMS Oils.350 cst and 1000 cst on regular basis. These Silicone Oils are heat stable & exhibit excellent oxidation resistance, very low vapour pressure and high flash point.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.Poly Dimethyl Silicone Oil, Poly Dimethyl Silicone Oil, Poly Dimethyl Silicone Oil,

We manufacture of Silicone products. We offer Carboxy silicone oil it's low molecular wt, solvent free linear polydimethyl siloxane with terminal primary Carbonal Group can be reacted with vide variety of polymer system. Mostly used in textile and other various industrial applications.

Carboxy Silicone Oil,Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

We offer solvent free highly epoxy-functional silicone fluid. It contains epoxy alkyl groups bound to silicon atoms by means of non-hydrolysable spacers.The epoxy groups can react with multiple chemical moieties, like amino- or hydroxy-functional materials. Thus Baysilone Fluid OF EP 901 can be used as crosslinker in formulations of accordingly functionalized bifunctional materials.

It can also be used to enhance the durability of aminofunctional silicones on substrates, e.g. to improve the wash resistancy of fabric softening, easy ironing or water repellency treatments on fabrics or to increase the cycle performance of release agents.Epoxy Silicone Oil, Epoxy Silicone Oil, Epoxy Silicone Oil, Epoxy Silicone Oil, Epoxy Silicone Oil, Epoxy Silicone Oil, Epoxy Silicone Oil.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Manufacturer and suppliers of Silicone fluid --Dimethyl Polysiloxane( 0.65 cst to 3 lac cst ), Amino oil, Methylhydrogen oil, hydroxy oil, Silicone epoxy oil, transformer oil, silicone cyclics ( D4 & D5). Silicone Emulsions Antifoam/Defoamer, Mould release, textile softners, Shining, Polish. Silicone Water Repellents Potassium MethylSiliconate,Silane Siloxane Base coat,Reactive Silicone based. Silicone Surfactant Poly ether Silicone Surfactant, Silicone Adjuvant (Silicone Spreader), Silicone Grease, Silicone for personal care, Silicone Silanes

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Methyl Hydrogen Silicone Oil is a colorless, transparent, chemically inert silicone fluid with high hydrophobicity. It crosslinks into a durable, waterproof film under low-temperature curing, making it ideal for treating fabrics, paper, leather, glass, ceramics, and metals. It also acts as a crosslinker for addition-type silicone rubber, a release agent, and an antifoaming agent.

 

Key Info:

Uses: Waterproofing agent, textile soft finishing, mold release.

Properties: High hydrophobicity, low-temperature cure, stable, non-toxic.

Safety: Non-hazardous, but releases hydrogen gas during curing, requiring ventilation.

 

350cSt silicone oil (Polydimethylsiloxane) is a medium-viscosity, clear, and odorless fluid. It features high thermal stability (-50°C to 200°C), low surface tension, and excellent water repellency. Common uses include: 

•  Lubricants for treadmills and machinery.
• Release agents in moulding.
• Cosmetics for silky textures.
• Industrial defoamers and dielectric fluids. 

 

Volatile silicones for personal care.

• Dimethicone fluids recommended for various pharmaceutical and personal care
• An silicone emulsion of amodimethicone, which is effective as a unique conditioner in personal care products, particularly in cosmetic bath soap.
• An additive in personal care products particularly in hair-care products, such as conditioners and shampoos.
• An emulsion of trimethyl silyl amodimethicone recommended as a unique conditioner in personal care particularly in skin and hair care products.
• Effective for use in antiperspirants, deodorants, skin creams, lotions, bath oils, sun tan and shaving products, make-up, hair sprays, and nail polishes, etc
• A silicone polyether copolymer, it is a good emulsifier and foam builder.

A cationic silicone emulsion for wet combing hair treatment.

Silicones create a protective layer that prevents moisture loss and helps the skin to stay supple and smooth

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

- Silicone Oils: Clear, colorless, odorless, and inert Dimethyl Polysiloxane, available in a viscosity range from 0.65 cps to 60,000 cps.- Amino Silicone Fluids: Amino-modified silicone fluids, available in both reactive and non-reactive forms.- Methyl Hydrogen Fluid: Widely used for finishing applications.- Hydroxy Silicone Fluid: A high-active silicone of medium viscosity with hydroxy end-blocked chains.- Defoamer Fluid: Activated silicone oil.- Transformer Oil: Silicone polydimethyl siloxane used as a cooling and insulating liquid for transformers and other electrical equipment.- Silicone D4 & D5 Fluids: Silicone D4 and D5 fluids and silicone cyclics.

SS MSF 250 is a long chain alkyl modified Silicones with excellent properties of lubrication. The long chain alkyl modification
enhances the hydrophobic character and the lubricity of the polymer.
Widely used in lubricants and other industries.


Has excellent adsorption of metal materials and excellent lubrication, the lubrication of aluminum is better, it can beused as metal lubricant and can also be used as the base oil of high-lubricity grease.Used in the mold release agent for PU products, plastics, rubber etc. & does not affect the surface printing, evaporation,pressing and painting and other follow-up processes, post stripping.Used as leveling agent for paint, latex, printing inks.


Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

We offer dimethyl siloxane silicone oil. 0. 65 cst to 3 lac cst. use as lubricant, release agent and in shining applications. Can be easily used to formulate defoamer oil, rubber emulsions, shining emulsion, antifoam / defoamer emulsion etc and other know industrial applications.also have raw / waste silicone oil. They are clear, colorless, odorless and inert Dimethyl Polysiloxane. These fluids are manufactured in the viscosity range . Intermediate viscosity grades are also available upon request. SS-SF Silicone fluids are soluble in chlorinated hydrocarbon solvents and aromatic solvents. They have limited solubility in other solvents (Solubility here depending on viscosity).

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

We are supplier of Silwet 408 and L 77, Silicone adjutant for agriculture use. It''s a supper wetting and spreading agent with lowers surface tension to less than 21 mN/m. Provides rapid uptale of Agriculture chemicals. Improves Spray coverage.

 Manufacturers of Silicone oils ( SS SF - ) is clear, colorless, odorless and inert Dimethyl Polysiloxane. These fluids are used as Release agent & Lubricant in variety of applications. manufactured in the viscosity range from 0.65 cps to 60000 cps, can be easily converted into emulsion by using non ionic emulsifiers.
Silicone oil - 0.65 cst, 1 cst, 3 cst, 5 cst, 10 cst, 20 cst, 50cst, 100cst, 350 cst, 1000cst, 5000 cst, 12500cst, 60000 cst etc D4 and D5 cyclics
Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

SS MSF 0307 is an Alkyl-Aryl polysiloxane withe xcellent properties of lubrication at higher pressure and used as release agent for high temperature molding and extruding Aluminium die cast.

SS OMS 250 is an Organo-modified Silicones (OMS) with excellent properties of surface tensions used for surface treatment of inorganic fillers and any pigments used in thermoplastic formulations. Different molecular arrangements of OMS derivatives are available.

SS MSF 250 is a long chain alkyl modified Silicones with excellent properties of lubrication. The long chain alkyl modification enhances the hydrophobic character and the lubricity of the polymer.

Specification:

• Color & Appearance--- Transparent --- Thin liquid
• 02 Viscosity 25°C (77°F), cSt 150 – 200 160 OK
• 03 Total solid content, % > 99.5 99.65 OK
• 04 Refractive Index 25°C (77°F) 1.487 – 1.507 1.496 OK
• 05 Acidity, ppm < 10 4 OK

SS VTF is a functional polymer of poly (dimethylsiloxane), developed toimpart an excellent bonding ability and foam stabilizing effect.It may be used as a formulation ingredient and is suitable for many industrialapplications. Mostly use in Cross linking system

We are ISO 9001:2015 Certified Manufacturer of Silicone Dielectric Oil used as cooling fluid in transformers. It is a 50 centistoke viscosity grade of polydimethylsiloxane fluid which has been specialy design to meet certain electrical specifications.It exhibits excellent dielectric, thermal and chemical properties is high-performance and environmentally safe. Applications for dielectric fluid include power distribution transformers installed for buildings, railroad and electrostatic precipitator transformers, pulse transformers, TV fly-back transformers, capacitors and many other high-reliability TV and radar circuit components also use in systems where heat transfer properties are as necessary as good dielectric behavior. It's accordance with IEC 60836.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Potassium methylSiliconate is an aqueous solution of Potassium methylSiliconate, water dilutable having slightly yellowish appearance used for the impregnation of mineral construction materials to make them water-repellent without significantly reducing water vapor permeability. Treatment with potassium methylsiliconate prevents efflorescence of salts absorbed and makes cleaning of the tiled floor easier. Low fired clay products such as roof tiles, bricks, unglazed floor tiles absorb water and the soluble salts are transported to the surface, disfiguring the product.

SS-SF 60K is a Silicone fluid having a unique combination of properties, which give superior performance in a variety of applications. It is clear, colorless, odorless, and inert Dimethyl Polysiloxane. This fluid is manufactured in the viscosity of 60,000 cps. Intermediate viscosity grades are also available upon request.

APPLICATIONS:
• Polishes (High gloss for automobile and furniture).
• Release agent (Plastic/rubber/ non-ferrous die casting).
• Heat Transfer.
• Power Transmission.
• Rust Prevention.
• Hydraulic Fluids.
• Dielectric Fluids.
• Repellency for aerated cement slabs/bricks.
• Paint and Coating Additives.
• Lubricants.
• Textile Finishing.
• Thread Lubricants.

OH PDMS 80000 is a high-viscosity (80,000 cSt), reactive silicone fluid. Its terminal hydroxyl groups enable cross-linking, making it a critical base polymer for RTV sealants, adhesives, and insulating coatings. It provides excellent thermal stability and water repellency.

5,000 cSt Polydimethylsiloxane (PDMS) silicone oil is a high-viscosity, clear, non-toxic, and inert silicone fluid is a high-viscosity, clear, non-toxic fluid, ideal for heavy-duty lubrication, damping, and heat transfer (-50°C to 200°C). It offers superior shear resistance, low volatility, and excellent dielectric properties, making it perfect for plastics, rubber, molding release, and electrical insulation. 

• Key Features: High-viscosity (thick), colorless, odorless, chemically inert.
• Applications: Plastic/rubber lubrication, damping fluids, mold release agents, electrical dielectrics.
• Temperature Range: Typically stable from -50°C up to +200°C.
• Benefits: Excellent oxidation resistance and water repellency.

SS-SF 50 is used in Personal care products such as antiperspirants, deodorants, hair sprays, cleansing creams, skin creams, lotions, bath oils, suntan products, nail polishes, etc.  Industrial applications such as glass vial and lens coatings, household product ingredients, mechanical fluids, penetrating oil ingredients, surface-active agents, coatings, electrical insulating fluids, and polish ingredients. 

Features

• Good Dielectric Properties.
• High water repellency.
• High shearability without breakdown.
• High compressibility.
• High spread ability.
• Low surface tension.
• Low fire hazard and reactivity.
• Low vapour pressure.
• Good heat stability.
• Good levelling and easy rubout 
• Essentially odourless and nontoxic.
• Soluble in a wide range of solvents.
• Volatile carrier.
• Compatible with a wide range of cosmetics ingredients.

SS-SF 20  is Silicone fluids having unique combination of properties, which give superior performance in a variety of applications. This is clear, colorless, odorless and inert Dimethyl Polysiloxane. Thise fluid are manufactured in the viscosity 20 cps. Intermediate viscosity grades are also available upon request. 

Manufacturers of Silicone oils ( SS SF - ) is clear, colorless, odorless and inert Dimethyl Polysiloxane. These fluids are used as Release agent & Lubricant in variety of applications. manufactured in the viscosity range from 0.65 cps to 60000 cps, can be easily converted into emulsion by using non ionic emulsifiers.

Silicone oil - 0.65 cst, 1 cst, 3 cst, 5 cst, 10 cst, 20 cst, 50cst, 100cst, 350 cst, 1000cst, 5000 cst, 12500cst, 60000 cst etc D4 and D5 cyclics

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.Silicone oil, Silicone oil, Silicone oil, Silicone oil, Silicone oil,Silicone oil, Silicone oil, Silicone oil, Silicone oil, Silicone oil, Silicone oil

We are suppliers of Silicone oil ( Food and Pharma Grade ) for various applications. It's clear, colourless polydimethyl siloxane fluids available in a wide range based on variations in viscosity As an inactive ingredient in pharmaceutical or cosmetic formulations, DMC silicone fluid can provide long lasting lubication, smoothfeel, emolliency and in application like skin care, sun care and oral care.

Silicone oil ( Food and Pharma Grade ), Silicone oil ( Food and Pharma Grade ),

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

We offer low viscosity silicone fluids 0.65 cst, 1 cst, 3 cst, 5 cst, 10 cst, 20 cst, 50 cst, 100 cst, D4, D5 fluids and cyclics for personal care and other industrial applications. Low Viscosity Silicone Fluids are clear, colorless, and odorless linear polydimethylsiloxane fluids that range in viscosities from 0.65cSt.

Important Note :

Mentioned Rates are of products having minimum concentration and % active solids.Rates may increase or decrease considering % Concentration and % Active content of products depending upon application or customer requirements

Hydroxy terminated polydimethylsiloxane a high active silicone of medium and high viscosity hydroxy end blocked Silicone polymer.
As the processing aids for silicone rubber, can improve the silicone rubber’s processing performance and used as silicone rubber structure controller,As fabric finishing agent, can significantly improve the polyester thread’s smoothness, sewing capacity, high temperature resistant and antistatic performance. Can make the fabric soft, smooth and elastic. Also give fabric, paper, leather waterproof, water-and performance.Can be used in the anti-adhesion processing of advanced quality paper.As the main ingredients for leather smooth agent and brightening agent. (Cured under room temperature by certain amount mixture of plastic coupling agent and catalyst agent).

 

SS-SF is Silicone fluids in various viscosities having unique combination of properties, which give superior performance in a variety of applications. They are clear, colorless, odorless and inert Dimethyl Polysiloxane. These fluids are manufactured in the viscosity range from 10 cps to 60000 cps. Intermediate viscosity grades are also available upon request. SS-SF Silicone fluids are soluble in chlorinated hydrocarbon solvents and aromatic solvents. They have limited solubility in other solvents (Solubility here depending on viscosity). 

10,000 cSt Polydimethylsiloxane (PDMS) silicone oil is a high-viscosity, clear, non-toxic, and inert silicone fluid is widely used in personal care applications, including antiperspirants, deodorants, hair sprays, cleansing creams, skin creams, lotions, bath oils, suntan products, and nail polishes. Additionally, it is suitable for various industrial applications such as: - Glass vial and lens coatings - Household product ingredients - Mechanical fluids and penetrating oil ingredients - Surface active agents and coatings - Electrical insulating fluids and polish ingredients

SS OMS 250 is an Organo-modified Silicones (OMS) with excellent properties of surface tensions used for surface treatment of inorganic fillers and any pigments used in thermoplastic formulations. Also used in the formulation of master batches as liquid dispersing additive. Different molecular arrangements of OMS derivatives are available.

SS OMS 250 is also used in the formulation of master batches as liquid dispersing additive. Increased productivity & Output, Higher filling grades, Improved weatherability and water repellency, reduce Cycle time & wastages , Excellent Surface finish, Easy Mould release , Gloss and Good Mar Resistance etc., SS OMS 250 is high temperature stable that it can be used in steam mill processes with elevated temperature much above 200 °C.SS OMS 250 can be applied directly to the pigment, e. g. during a spray drying or milling operation or in a tumble mixer with dosage of 0.5 to 3% for 40% pigment loading. SS OMS 250 is liquid additive used for surface treatment to improve dispersion properties.

Benefits : Higher color strength, Improved mechanical properties, Higher filling grades, Improved weatherability, improved water repellency/ lower water up-take, Excellent rheological properties, Excellent properties of lubrication, Abrasion resistance, Anti-sticking resistance, Printability, Good affinity with organic materials. Non-Reactive.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Amodimethicone (SS AMO- 100) is a 100% amine functional Silicone fluid. It is one of the key ingredients in a number of hair care & personal care products, with excellent softness and lubrication properties and unique characteristics for wet and dry combing.

Alkyl modified silicone fluid is liquid silicone wax to be used for surface treatment of inorganic fillers and any pigments used in thermoplastic formulations. Also as a liquid dispersing additive used for surface treatment to improve dispersion properties of: Inorganic fillers ( ie titanium dioxide, talc ), Inorganic pigments ( ie Ultramarine blue, iron oxides ), Organic pigments ( ie Phthalo blues or DPPs ), Flame retardants ( ie MDH or ATH ) Masterbatches as liquid dispersing additive.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Defoamer Oil ( ASO ) is a activated silicone oil compound used as general purpose antifoam/ Defoamer Compound in variety of Industries. Also used in preparation of Antifoam/ Defoamer Emulsions.
ASO 200 is an anhydrous, low viscosity, readily dispersible and relatively alkyli resistant Organo Modified silicone defoamer compound with good de-aeriation property. Used in preparation of Alkali resistance Antifoam/ Defoamer Emulsion.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Dimethiconol is Silicone fluids with reactive hydroxyl group in various viscosities having unique combination of properties, which give superior performance in a variety of applications. They are clear, colorless, odorless. These fluids are manufactured in the viscosity range from 20 cps to 60000 cps. Intermediate viscosity grades are also available upon request.

We are ISO 9001:2008 certified manufacture of liquid silicone rubber ( LSR ) used for Mold making of intricate design models and articals. Can be used in medial equipments, All types of moulding purposes and In good grade applications. Formore product details feel free to contact us.

Important Note : Rates many Decrease or increase depending upon product specifications, application and order qty.

Defoamer fluid (SS ASO) is Defoamer Oil are designed to provide optimum Antifoam performance combined with good foam knock down performance having unique combination of properties, which give superior performance in a variety of applications. Can be easily converted into emulsion by using non ionic emulsifiers which are used to Manufacture Antifoam / Defoamer Emulsions. SS-ASO 100 High performance 100% Activated Silicone Oil used as general purpose. Also used in preparation of Antifoam / Defoamer Emulsions. SS-ASO 150  Low cost 100% Activated Silicone Oil used as general purpose antifoam Also used in preparation of low cost Antifoam / Defoamer Emulsions. SS ASO 200 An anhydrous, low-viscosity, readily dispersible and relatively alkali-resistant organo-modified silicone defoamer compound with good deaeration characteristics. Also used in preparation of alkali resistance Antifoam / Defoamer Emulsions.


Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

SS AMS are Amino modified Silicone Fluids which are reactive and non reactive in nature that give excellent elastic properties, bounce, excellent softness, silky finish to variety of fabrics with durability and unique handle.


SS AMS can be easily converted into emulsion by using non ionic emulsifiers which are used in textile (Cloth & Garments) & leather to generate surface smoothness with a soft handle, suppleness & silky finish that is capable of withstanding repeated washing cycles. The product can be used by both methods i.e. padding as well as exhaust.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Methyl siloxane, Methyl vinyl gums (Polydimethyl vinyl siloxane)– Specially design for manufacturing HCR master batches, master batches of pigments, processing additives, silicone elastomers; and reinforcing and diluting fillers for plastics and organic elastomers

ISO 9001:2008 Certified Manufacture of silicone spray as Mould release and shining agent. Used in Automobile ind , Plastic ind, for Engineering products, Chemical, Electrical and construction industries etc. effective release agnet for molding Acrylics, Polyethylene, Polypropylene, Polyurethanes, Polyesters, Cellulose, SBR, Natural Rubber, Neoprene & Nitrile, etc.

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.

Simethicone USP, Activated Dimethicone IP, Simethicone Emulsion USP Food grade antifoams are polydimethylsiloxane based antifoams specifically developed for the pharmaceutical and the food processing industries. Pharmaceutical applications often include antiflatuence carminative) and antacid preparations. Simethicone USP / Activated Dimethicone IP Excellent defoaming and antifoaming properties which gives superior product performance in antiflatulent preparations Easily formulated in to antifoam emulsion or dispersion Simethicone USP / IP,Simethicone USP / IP, Simethicone, Simethicone USP / IP, Simethicone , Simethicone

 

Important Note : Mentioned Rates are of products having minimum concentration and % active solids. Rates may increase or decrease depending upon Viscosity, % Concentration, % Active content, other specifications of products, Application, requirement, suggested and order qty.